My home computerMy home computerHere you will not see paper about mood. Is simpl I have decided to make something little bit nonconventional of the standard case and that for me has turned out.
 That a general view of my workstation. In schedules - to buy in the summer a spinned seat on small wheels and the desktop luminescent lamp on an arm. The configuration on current day such:
|
And it - is already larger...  |
And it - initial variant. Only I was colors ivoru - an ivory. As I have found out already then, Chinese have copied appearance from any brand. Steel of the case thick, all is rolled up, covers are removed upwards after removal more truly the panel. In the complete set - two fans (the truth, without a conclusion of a tachometer). 3 " devices are put on a transitive sled for as such 3 ` compartments are not present - all 3 `. A power unit - 300w. As a whole it is quite good, but it would be desirable for the best. I was a pity Delta have missed. Would be fair 300w for 20 $usa.   |
All 5 big (5`) compartments are borrowed. In mobilerack and drives of CD ROM and FDD - yltra-bright blue light-emitting diodes. In the case - too. The door - a good thing, strongly reduces noise from drives. And devices on color to select it is not necessary...  |
"Miracle of technics" - six-channel electronic reobus. Adjusts speed of fans. And at me it is a lot of them - two in mobile rack; one on the processor; one in a power unit; two the case - behind and from above. On video to a card - it is not adjusted, but yet does not get noise. Will die - I shall put something passive, for example from Zalman... Only reobus it a little unfinished - while I could not pick up suitable handles. Here, by the way, the small minus of the case with a door - was necessary to displace all in depth, differently the door was not closed.  
|
The altered forward panel under cover. Now there not USB, and audio IN and OUT as minijack and plugs for connection of video and a sound as tulips. Here I have deduced an input from a tuner and an output with videokard. It is convenient, when it would be desirable cinema on TV to deduce or from a video player of that to write down. Also, there two toggle-switches for inclusion of illumination - lamps in the case and diodes above a door.  
|
The top panel. Conclusions USB, audio an input - output and a photodetector of a TV-tuner. Handles for moving the case and a lattice of the top fan are visible.  
|
At the left - windows with illumination. The sheaf of spare keys for mobile rack is visible. On the right - a kind of the case behind. Unfortunately, not absolutely sharply.  
|
The back panel. All poor standard lattices are cut and replaced with chromeplated "Grills". Beautifully and to noise it is less. A power supply unit - on screws with large heads to remove very conveniently. On the right - the wires leaving to the front panel and to remote RF to the block of a tuner are visible.  
|
Alterations of the upper panel. At the left - the deputy. Now without a key not open. On the right - the cut grid above the fan. All the same, outside it is not visible and to noise it was lowered appreciablly.  
|
We make the window. What dremel - a simple electrofret saw and a drill for the beginning. At the left - all initial materials - plexiglas in a packing film, a double-sided adhesive tape, furniture adhesive milding. On the right - available window. Furnish molding close up.   |
Sort of the window from within. What screws - only a double-sided adhesive tape. Safetyly - not break. And it is beautiful - outside - any screw.  
|
At the left - result of work - a ready wall with the window. For visualization it is removed and put to tank. From the right - organization of illumination. Yes... One lamp with the cool cathode from ColerMaster will be a little. Whether one more what to buy...   |
Rounding wires of power supply. A yellow import adhesive tape and black termo-shrinkage pvc tube. All is sleek, and in my opinion, even it is beautiful.  
|
After such beauty self-made round aprons have gone in trash. Though aprons for "teapot" good...  
|
The reworked{altered} tuner Avet TV Studio 205 . RF the module is removed from pcb card and born for limits of case. The connective cable is made from printer Centronix cable. The plug - d-sub monitor type. Alteration has apparently lowered a level of interferences and has raised{increased} quality of the map... .  |
Small fashions of the printer and a mousy. For the printer the light emitting diode on ultra brilliant blue is replaced, and for a mousy - has added illumination of a roller - the blessing, it was from diaphanous plexiglass and a diaphanous elastic band on a rim. I needed to solder in the second light emitting diode only... 
 |
Have read up up to here? I congratulate, all this!. The description of my mockeries at tank was completed...
